MIDAC traction batteries for material handling equipment
MIDAC – is an Italian manufacturer, one of the oldest traction battery manufacturers in Europe. Here you will find the most popular flooded traction batteries for forklifts and warehouse equipment: 24V, 48V, and 80V, with a PDF drawing for each battery.
Based on this data, we could not find any batteries. Please check the voltage and capacity (e.g., 48V 625Ah) or contact us – we will select the right battery based on your drawing or forklift model.
Showing all 40 results
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 150Ah traction battery 24V2MBS75 (24V2PzB150), 662x147x592 mm
MIDAC 24V 150Ah traction battery 24V2MBS75 (24V2PzB150), 662x147x592 mm
- Voltage – 24 V, capacity (C5) – 150 Ah
- MIDAC cells – 2MBS75, comply with BS standard PzB cells 2PzB150 (designation: 24V2MBS75 = 24V2PzB150Ah)
- Dimensions (length x width x height) – 662 x 147 x 592 mm, weight – 149 kg
- Drawing No. – 507309 (the drawing in PDF format can be found under „Technical Documents (PDF)“)
- Recommended charging current is 18.8 – 30 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V2MBS75 is the same as 24V2PzB150Ah (24 V, 150 Ah). It is suitable as a replacement for 24V 2PzB150 traction batteries from other manufacturers, provided that the box dimensions (662 x 147 x 592 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 200Ah traction battery 24V2MBS100 (24V2PzB200), 662x147x686 mm
MIDAC 24V 200Ah traction battery 24V2MBS100 (24V2PzB200), 662x147x686 mm
- Voltage - 24 V, capacity (C5) - 200 Ah
- MIDAC cells - 2MBS100, comply with BS standard PzB cells 2PzB200 (designation: 24V2MBS100 = 24V2PzB200Ah)
- Dimensions (length x width x height) – 662 x 147 x 686 mm, weight – 189 kg
- Drawing no. – 507302 (the drawing in PDF format can be found under the section „Technical documents (PDF)“)
- Recommended charging current: 25 – 40 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V2MBS100 is the same as 24V2PzB200Ah (24 V, 200 Ah). It is suitable as a replacement for 24V 2PzB200 traction batteries from other manufacturers, provided the battery box dimensions (662 x 147 x 686 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 225Ah traction battery 24V3MBS75 (24V3PzB225), 645x196x570 mm
MIDAC 24V 225Ah traction battery 24V3MBS75 (24V3PzB225), 645x196x570 mm
- Voltage – 24 V, capacity (C5) – 225 Ah
- MIDAC cells – 3MBS75, comply with BS standard PzB cells 3PzB225 (designation: 24V3MBS75 = 24V3PzB225Ah)
- Dimensions (length x width x height) – 645 x 196 x 570 mm, weight – 198 kg
- Drawing No. – 505226 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current is 28.1 – 45 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MBS75 is the same as 24V3PzB225Ah (24 V, 225 Ah). It can be used as a replacement for 24V 3PzB225 traction batteries from other manufacturers, provided the battery box dimensions (645 x 196 x 570 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 240Ah traction battery 24V3MDL80 (24V3PzS240), 830x219x537 mm
MIDAC 24V 240Ah traction battery 24V3MDL80 (24V3PzS240), 830x219x537 mm
- Voltage – 24 V, capacity (C5) – 240 Ah
- MIDAC cells – 3MDL80, compliant with DIN standard PzS cells 3PzS240 (designation: 24V3MDL80 = 24V3PzS240Ah)
- Dimensions (length x width x height) – 830 x 219 x 537 mm, weight – 239 kg
- Drawing No. – 561630 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current is 30 – 48 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MDL80 is the same as 24V3PzS240Ah (24 V, 240 Ah). It is suitable as a replacement for 24V 3PzS240 traction batteries from other manufacturers, provided that the box dimensions (830 x 219 x 537 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 250Ah traction battery 24V2MDL125 (24V2PzS250), 624x212x627 mm
MIDAC 24V 250Ah traction battery 24V2MDL125 (24V2PzS250), 624x212x627 mm
- Voltage - 24 V, capacity (C5) - 250 Ah
- MIDAC cells – 2MDL125, comply with DIN standard PzS cells 2PzS250 (designation: 24V2MDL125 = 24V2PzS250Ah)
- Dimensions (length x width x height) – 624 x 212 x 627 mm, weight – 214 kg
- Drawing No. – 570134 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current: 31.3 – 50 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V2MDL125 is the same as 24V2PzS250Ah (24 V, 250 Ah). It is suitable as a replacement for 24V 2PzS250 traction batteries from other manufacturers, provided that the box dimensions (624 x 212 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 270Ah traction battery 24V3MDL90 (24V3PzS270), 624x284x537 mm
MIDAC 24V 270Ah traction battery 24V3MDL90 (24V3PzS270), 624x284x537 mm
- Voltage – 24 V, capacity (C5) – 270 Ah
- MIDAC cells – 3MDL90, comply with DIN standard PzS cells 3PzS270 (designation: 24V3MDL90 = 24V3PzS270Ah)
- Dimensions (length x width x height) – 624 x 284 x 537 mm, weight – 237 kg
- Drawing no. - 561616 (the drawing in PDF format can be found under the „Technical documents (PDF)“ section)
- Recommended charging current: 33.8 – 54 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MDL90 is the same as 24V3PzS270Ah (24 V, 270 Ah). It is suitable as a replacement for 24V 3PzS270 traction batteries from other manufacturers, provided that the box dimensions (624 x 284 x 537 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 300Ah traction battery 24V4MBS75 (24V4PzB300), 645x245x570 mm
MIDAC 24V 300Ah traction battery 24V4MBS75 (24V4PzB300), 645x245x570 mm
- Voltage: 24 V, capacity (C5): 300 Ah
- MIDAC cells – 4MBS75, comply with BS standard PzB cells 4PzB300 (designation: 24V4MBS75 = 24V4PzB300Ah)
- Dimensions (length x width x height) – 645 x 245 x 570 mm, weight – 247 kg
- Drawing No. – 505928 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 37.5 – 60 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V4MBS75 is the same as 24V4PzB300Ah (24 V, 300 Ah). It is suitable as a replacement for 24V 4PzB300 traction batteries from other manufacturers, provided the battery box dimensions (645 x 245 x 570 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 300Ah traction battery 24V3MBS100 (24V3PzB300), 657x197x675 mm
MIDAC 24V 300Ah traction battery 24V3MBS100 (24V3PzB300), 657x197x675 mm
- Voltage: 24 V, capacity (C5): 300 Ah
- MIDAC cells – 3MBS100, comply with BS standard PzB cells 3PzB300 (designation: 24V3MBS100 = 24V3PzB300Ah)
- Dimensions (length x width x height) – 657 x 197 x 675 mm, weight – 262 kg
- Drawing No. – 507139 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 37.5 – 60 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MBS100 is the same as 24V3PzB300Ah (24 V, 300 Ah). It is suitable as a replacement for 24V 3PzB300 traction batteries from other manufacturers, provided that the box dimensions (657 x 197 x 675 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 300Ah traction battery 24V3MBS100 (24V3PzB300), 752x172x657 mm
MIDAC 24V 300Ah traction battery 24V3MBS100 (24V3PzB300), 752x172x657 mm
- Voltage: 24 V, capacity (C5): 300 Ah
- MIDAC cells – 3MBS100, comply with BS standard PzB cells 3PzB300 (designation: 24V3MBS100 = 24V3PzB300Ah)
- Dimensions (length x width x height) – 752 x 172 x 657 mm, weight – 260 kg
- Drawing No. – 507595 (the drawing in PDF format can be found under the section „Technical Documents (PDF)“)
- Recommended charging current – 37.5 – 60 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MBS100 is the same as 24V3PzB300Ah (24 V, 300 Ah). It is suitable as a replacement for 24V 3PzB300 traction batteries from other manufacturers, provided the battery box dimensions (752 x 172 x 657 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 375Ah traction battery 24V3MDL125 (24V3PzS375), 624x284x627 mm
MIDAC 24V 375Ah traction battery 24V3MDL125 (24V3PzS375), 624x284x627 mm
- Voltage – 24 V, capacity (C5) – 375 Ah
- MIDAC cells – 3MDL125, comply with the DIN standard PzS cells 3PzS375 (designation: 24V3MDL125 = 24V3PzS375Ah)
- Dimensions (length x width x height) – 624 x 284 x 627 mm, weight – 290 kg
- Drawing No. – 568150 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current: 46.9 – 75 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MDL125 is the same as 24V3PzS375Ah (24 V, 375 Ah). It is suitable as a replacement for 24V 3PzS375 traction batteries from other manufacturers, provided that the box dimensions (624 x 284 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 375Ah traction battery 24V3MDL125 (24V3PzS375), 830x219x627 mm
MIDAC 24V 375Ah traction battery 24V3MDL125 (24V3PzS375), 830x219x627 mm
- Voltage – 24 V, capacity (C5) – 375 Ah
- MIDAC cells – 3MDL125, comply with the DIN standard PzS cells 3PzS375 (designation: 24V3MDL125 = 24V3PzS375Ah)
- Dimensions (length x width x height) – 830 x 219 x 627 mm, weight – 295 kg
- Drawing No. – 577332 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current: 46.9 – 75 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MDL125 is the same as 24V3PzS375Ah (24 V, 375 Ah). It is suitable as a replacement for 24V 3PzS375 traction batteries from other manufacturers if the box dimensions (830 x 219 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 400Ah traction battery 24V4MBS100 (24V4PzB400), 657x245x675 mm
MIDAC 24V 400Ah traction battery 24V4MBS100 (24V4PzB400), 657x245x675 mm
- Voltage – 24 V, capacity (C5) – 400 Ah
- MIDAC cells – 4MBS100, comply with BS standard PzB cells 4PzB400 (designation: 24V4MBS100 = 24V4PzB400Ah)
- Dimensions (length x width x height) – 657 x 245 x 675 mm, weight – 324 kg
- Drawing No. – 507140 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current is 50 – 80 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V4MBS100 is the same as 24V4PzB400Ah (24 V, 400 Ah). It is suitable as a replacement for 24V 4PzB400 traction batteries from other manufacturers if the box dimensions (657 x 245 x 675 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 465Ah traction battery 24V3MDL155 (24V3PzS465), 785x209x778 mm
MIDAC 24V 465Ah traction battery 24V3MDL155 (24V3PzS465), 785x209x778 mm
- Voltage: 24 V, capacity (C5): 465 Ah
- MIDAC cells – 3MDL155, comply with DIN standard PzS cells 3PzS465 (designation: 24V3MDL155 = 24V3PzS465Ah)
- Dimensions (length x width x height) – 785 x 209 x 778 mm, weight – 347 kg
- Drawing No. – 506005 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current is 58.1 – 93 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V3MDL155 is the same as 24V3PzS465Ah (24 V, 465 Ah). It is suitable as a replacement for 24V 3PzS465 traction batteries from other manufacturers if the box dimensions (785 x 209 x 778 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 500Ah traction battery 24V5MBS100 (24V5PzB500), 657x294x675 mm
MIDAC 24V 500Ah traction battery 24V5MBS100 (24V5PzB500), 657x294x675 mm
- Voltage – 24 V, capacity (C5) – 500 Ah
- MIDAC cells – 5MBS100, comply with BS standard PzB cells 5PzB500 (designation: 24V5MBS100 = 24V5PzB500Ah)
- Dimensions (length x width x height) – 657 x 294 x 675 mm, weight – 386 kg
- Drawing No. – 507141 (you can find the drawing in PDF format under the „Technical Documents (PDF)“ section)
- Recommended charging current – 62.5 – 100 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V5MBS100 is the same as 24V5PzB500Ah (24 V, 500 Ah). It is suitable as a replacement for 24V 5PzB500 traction batteries from other manufacturers if the box dimensions (657 x 294 x 675 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 620Ah traction battery 24V4MDL155 (24V4PzS620), 785x292x778 mm
MIDAC 24V 620Ah traction battery 24V4MDL155 (24V4PzS620), 785x292x778 mm
- Voltage – 24 V, capacity (C5) – 620 Ah
- MIDAC cells – 4MDL155, comply with the DIN standard PzS cells 4PzS620 (designation: 24V4MDL155 = 24V4PzS620Ah)
- Dimensions (length x width x height) – 785 x 292 x 778 mm, weight – 464 kg
- Drawing No. – 506448 (the drawing in PDF format can be found under the section „Technical Documents (PDF)“)
- Recommended charging current – 77.5 – 124 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V4MDL155 is the same as 24V4PzS620Ah (24 V, 620 Ah). It is a suitable replacement for 24V 4PzS620 traction batteries from other manufacturers, provided the battery box dimensions (785 x 292 x 778 mm) and the layout of the terminals and connector match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 875Ah traction battery 24V7MDL125 (24V7PzS875), 830x435x627 mm
MIDAC 24V 875Ah traction battery 24V7MDL125 (24V7PzS875), 830x435x627 mm
- Voltage: 24 V, capacity (C5): 875 Ah
- MIDAC cells – 7MDL125, comply with DIN standard PzS cells 7PzS875 (designation: 24V7MDL125 = 24V7PzS875Ah)
- Dimensions (length x width x height) – 830 x 435 x 627 mm, weight – 592 kg
- Drawing No. – 579118 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current: 109.4 – 175 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V7MDL125 is the same as 24V7PzS875Ah (24 V, 875 Ah). It can be used as a replacement for 24V 7PzS875 traction batteries from other manufacturers, provided the battery box dimensions (830 x 435 x 627 mm) and the layout of the terminals and connector match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
Batteries GEL, AGM, Pb and others
MIDAC 24V 1000Ah traction battery 24V8MDL125 (24V8PzS1000), 830x489x627 mm
MIDAC 24V 1000Ah traction battery 24V8MDL125 (24V8PzS1000), 830x489x627 mm
- Voltage – 24 V, capacity (C5) – 1000 Ah
- MIDAC cells - 8MDL125, comply with DIN standard PzS cells 8PzS1000 (designation: 24V8MDL125 = 24V8PzS1000Ah)
- Dimensions (length x width x height) – 830 x 489 x 627 mm, weight – 666 kg
- Drawing No. – 579116 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 125 – 200 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 24V8MDL125 is the same as 24V8PzS1000Ah (24 V, 1000 Ah). It is suitable as a replacement for 24V 8PzS1000 traction batteries from other manufacturers, provided the box dimensions (830 x 489 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 48V 500Ah traction battery 48V4MDL125 (48V4PzS500), 830x522x627 mm
MIDAC 48V 500Ah traction battery 48V4MDL125 (48V4PzS500), 830x522x627 mm
- Voltage – 48 V, capacity (C5) – 500 Ah
- MIDAC cells – 4MDL125, comply with DIN standard PzS cells 4PzS500 (designation: 48V4MDL125 = 48V4PzS500Ah)
- Dimensions (length x width x height) – 830 x 522 x 627 mm, weight – 704 kg
- Drawing No. – 569786 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 62.5 – 100 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 48V4MDL125 is the same as 48V4PzS500Ah (48 V, 500 Ah). It is suitable as a replacement for 48V 4PzS500 traction batteries from other manufacturers, provided the battery box dimensions (830 x 522 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 48V 620Ah traction battery 48V4MDL155 (48V4PzS620), 1223x355x784 mm
MIDAC 48V 620Ah traction battery 48V4MDL155 (48V4PzS620), 1223x355x784 mm
- Voltage: 48 V, capacity (C5): 620 Ah
- MIDAC cells – 4MDL155, comply with DIN standard PzS cells 4PzS620 (designation: 48V4MDL155 = 48V4PzS620Ah)
- Dimensions (length x width x height) – 1223 x 355 x 784 mm, weight – 904 kg
- Drawing No. – 545240 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 77.5 – 124 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 48V4MDL155 is the same as 48V4PzS620Ah (48 V, 620 Ah). It is suitable as a replacement for 48V 4PzS620 traction batteries from other manufacturers, provided that the box dimensions (1223 x 355 x 784 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 48V 625Ah traction battery 48V5MDL125 (48V5PzS625), 830x630x627 mm
MIDAC 48V 625Ah traction battery 48V5MDL125 (48V5PzS625), 830x630x627 mm
- Voltage – 48 V, capacity (C5) – 625 Ah
- MIDAC cells – 5MDL125, comply with DIN standard PzS cells 5PzS625 (designation: 48V5MDL125 = 48V5PzS625Ah)
- Dimensions (length x width x height) – 830 x 630 x 627 mm, weight – 858 kg
- Drawing No. – 569784 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current is 78.1 – 125 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 48V5MDL125 is the same as 48V5PzS625Ah (48 V, 625 Ah). It is suitable as a replacement for 48V 5PzS625 traction batteries from other manufacturers if the box dimensions (830 x 630 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 48V 625Ah traction battery 48V5MDL125 (48V5PzS625), 1030x529x627 mm
MIDAC 48V 625Ah traction battery 48V5MDL125 (48V5PzS625), 1030x529x627 mm
- Voltage – 48 V, capacity (C5) – 625 Ah
- MIDAC cells – 5MDL125, comply with DIN standard PzS cells 5PzS625 (designation: 48V5MDL125 = 48V5PzS625Ah)
- Dimensions (length x width x height) – 1030 x 529 x 627 mm, weight – 856 kg
- Drawing no. – 568064 (you can find the drawing in PDF format under the „Technical Documents (PDF)“ section)
- Recommended charging current is 78.1 – 125 A
- Box dimensions are adapted for STILL forklifts
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 48V5MDL125 is the same as 48V5PzS625Ah (48 V, 625 Ah). It is suitable as a replacement for 48V 5PzS625 traction batteries from other manufacturers, provided the battery box dimensions (1030 x 529 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 48V 750Ah traction battery 48V6MDL125 (48V6PzS750), 830x738x627 mm
MIDAC 48V 750Ah traction battery 48V6MDL125 (48V6PzS750), 830x738x627 mm
- Voltage: 48 V, capacity (C5): 750 Ah
- MIDAC cells – 6MDL125, comply with DIN standard PzS cells 6PzS750 (designation: 48V6MDL125 = 48V6PzS750Ah)
- Dimensions (length x width x height) – 830 x 738 x 627 mm, weight – 1010 kg
- Drawing No. – 569782 (you can find the drawing in PDF format under the „Technical Documents (PDF)“ section)
- Recommended charging current: 93.8 – 150 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 48V6MDL125 is the same as 48V6PzS750Ah (48 V, 750 Ah). It is suitable as a replacement for 48V 6PzS750 traction batteries from other manufacturers, provided the battery box dimensions (830 x 738 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 48V 775Ah traction battery 48V5MDL155 (48V5PzS775), 1223x427x784 mm
MIDAC 48V 775Ah traction battery 48V5MDL155 (48V5PzS775), 1223x427x784 mm
- Voltage: 48 V, capacity (C5): 775 Ah
- MIDAC cells – 5MDL155, comply with DIN standard PzS cells 5PzS775 (designation: 48V5MDL155 = 48V5PzS775Ah)
- Dimensions (length x width x height) – 1223 x 427 x 784 mm, weight – 1089 kg
- Drawing No. – 545238 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current: 96.9 – 155 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 48V5MDL155 is the same as 48V5PzS775Ah (48 V, 775 Ah). It is suitable as a replacement for 48V 5PzS775 traction batteries from other manufacturers, provided the battery box dimensions (1223 x 427 x 784 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 80V 500Ah traction battery 80V4MDL125 (80V4PzS500), 1026x708x627 mm
MIDAC 80V 500Ah traction battery 80V4MDL125 (80V4PzS500), 1026x708x627 mm
- Voltage – 80 V, capacity (C5) – 500 Ah
- MIDAC cells – 4MDL125, comply with DIN standard PzS cells 4PzS500 (designation: 80V4MDL125 = 80V4PzS500Ah)
- Dimensions (length x width x height) – 1026 x 708 x 627 mm, weight – 1188 kg
- Drawing No. – 574912 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 62.5 – 100 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V4MDL125 is the same as 80V4PzS500Ah (80 V, 500 Ah). It can be used as a replacement for 80V 4PzS500 traction batteries from other manufacturers, provided that the battery box dimensions (1026 x 708 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 80V 620Ah traction battery 80V4MDL155 (80V4PzS620), 1015x680x785 mm
MIDAC 80V 620Ah traction battery 80V4MDL155 (80V4PzS620), 1015x680x785 mm
- Voltage: 80 V, capacity (C5): 620 Ah
- MIDAC cells – 4MDL155, comply with the DIN standard PzS cells 4PzS620 (designation: 80V4MDL155 = 80V4PzS620Ah)
- Dimensions (length x width x height) – 1015 x 680 x 785 mm, weight – 1425 kg
- Drawing No. – 505903 (the drawing in PDF format can be found under the „Technical documents (PDF)“ section)
- Recommended charging current – 77.5 – 124 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V4MDL155 is the same as 80V4PzS620Ah (80 V, 620 Ah). It is suitable as a replacement for 80V 4PzS620 traction batteries from other manufacturers, provided the battery box dimensions (1015 x 680 x 785 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 80V 620Ah traction battery 80V4MDL155 (80V4PzS620), 1028x711x784 mm
MIDAC 80V 620Ah traction battery 80V4MDL155 (80V4PzS620), 1028x711x784 mm
- Voltage: 80 V, capacity (C5): 620 Ah
- MIDAC cells – 4MDL155, comply with the DIN standard PzS cells 4PzS620 (designation: 80V4MDL155 = 80V4PzS620Ah)
- Dimensions (length x width x height) – 1028 x 711 x 784 mm, weight – 1481 kg
- Drawing no. – 574918 (the drawing in PDF format can be found under the section „Technical documents (PDF)“)
- Recommended charging current – 77.5 – 124 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V4MDL155 is the same as 80V4PzS620Ah (80 V, 620 Ah). It is suitable as a replacement for 80V 4PzS620 traction batteries from other manufacturers, provided the battery box dimensions (1028 x 711 x 784 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 80V 620Ah traction battery 80V4MDL155 (80V4PzS620), 1028x710x780 mm
MIDAC 80V 620Ah traction battery 80V4MDL155 (80V4PzS620), 1028x710x780 mm
- Voltage: 80 V, capacity (C5): 620 Ah
- MIDAC cells – 4MDL155, comply with the DIN standard PzS cells 4PzS620 (designation: 80V4MDL155 = 80V4PzS620Ah)
- Dimensions (length x width x height) – 1028 x 710 x 780 mm, weight – 1455 kg
- Drawing No. – 507929 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current – 77.5 – 124 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V4MDL155 is the same as 80V4PzS620Ah (80 V, 620 Ah). It is suitable as a replacement for 80V 4PzS620 traction batteries from other manufacturers, provided the battery box dimensions (1028 x 710 x 780 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 80V 625Ah traction battery 80V5MDL125 (80V5PzS625), 1026x852x627 mm
MIDAC 80V 625Ah traction battery 80V5MDL125 (80V5PzS625), 1026x852x627 mm
- Voltage – 80 V, capacity (C5) – 625 Ah
- MIDAC cells – 5MDL125, comply with DIN standard PzS cells 5PzS625 (designation: 80V5MDL125 = 80V5PzS625Ah)
- Dimensions (length x width x height) – 1026 x 852 x 627 mm, weight – 1438 kg
- Drawing No. 574910 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current is 78.1 – 125 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V5MDL125 is the same as 80V5PzS625Ah (80 V, 625 Ah). It is suitable as a replacement for 80V 625 Ah traction batteries from other manufacturers, provided that the box dimensions (1026 x 852 x 627 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 80V 775Ah traction battery 80V5MDL155 (80V5PzS775), 1028x855x784 mm
MIDAC 80V 775Ah traction battery 80V5MDL155 (80V5PzS775), 1028x855x784 mm
- Voltage – 80 V, capacity (C5) – 775 Ah
- MIDAC cells – 5MDL155, comply with DIN standard PzS cells 5PzS775 (designation: 80V5MDL155 = 80V5PzS775Ah)
- Dimensions (length x width x height) – 1028 x 855 x 784 mm, weight – 1776 kg
- Drawing No. – 574916 (the drawing in PDF format can be found under the „Technical Documents (PDF)“ section)
- Recommended charging current: 96.9 – 155 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V5MDL155 is the same as 80V5PzS775Ah (80 V, 775 Ah). It is suitable as a replacement for 80V 5PzS775 traction batteries from other manufacturers, provided the battery box dimensions (1028 x 855 x 784 mm) and the layout of the terminals and connector match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 80V 930Ah traction battery 80V6MDL155 (80V6PzS930), 1028x999x784 mm
MIDAC 80V 930Ah traction battery 80V6MDL155 (80V6PzS930), 1028x999x784 mm
- Voltage: 80 V, capacity (C5): 930 Ah
- MIDAC cells – 6MDL155, comply with DIN standard PzS cells 6PzS930 (designation: 80V6MDL155 = 80V6PzS930Ah)
- Dimensions (length x width x height) – 1028 x 999 x 784 mm, weight – 2096 kg
- Drawing no. – 571498 (the drawing in PDF format can be found under the „Technical documents (PDF)“ section)
- Recommended charging current – 116.3 – 186 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. Therefore, the battery 80V6MDL155 is the same as 80V6PzS930Ah (80 V, 930 Ah). It is suitable as a replacement for 80V 6PzS930 traction batteries from other manufacturers, provided the battery box dimensions (1028 x 999 x 784 mm) and the layout of the terminals and plug match – please compare with the drawing before ordering.
MIDAC is one of the oldest battery manufacturers in the EU, specializing in the production of flooded traction batteries for material handling and warehouse equipment. This battery is supplied from the express delivery warehouse in Italy, at the MIDAC factory – the delivery lead time is usually only 2–3 weeks. The batteries are always delivered in new, insulated metal boxes, factory-assembled and calibrated, no older than 2 weeks from the date of manufacture, with an integrated central water refilling system.
We can offer a trade-in for your old battery – please write about this in the order notes or contact us. Before ordering, we always recommend comparing your battery with the drawing, and if you have any questions, please contact us.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 130Ah traction battery block MBS 2/130, 665x138x479 mm
MIDAC 24V 130Ah traction battery block MBS 2/130, 665x138x479 mm
- Voltage: 24 V, capacity (C5): 130 Ah
- Block MBS 2/130 – MBS cells (corresponds to BS standard PzB)
- Dimensions (length x width x height) – 665 x 138 x 479 mm, weight – 110 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current: 16.3 – 26 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS to BS standard PzB cells. The MBS 2/130 block is a complete 24 V, 130 Ah traction battery with PzB type cells in a single plastic box: a cheaper, yet reliable alternative to classic 24V 130Ah batteries in metal boxes, provided the dimensions (665 x 138 x 479 mm) match.
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 150Ah traction block MBS 2/150, 665x138x549 mm
MIDAC 24V 150Ah traction block MBS 2/150, 665x138x549 mm
- Voltage – 24 V, capacity (C5) – 150 Ah
- Blokas MBS 2/150 – MBS cells (compliant with BS standard PzB)
- Dimensions (length x width x height) – 665 x 138 x 549 mm, weight – 125 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current is 18.8 – 30 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. The MBS 2/150 block is a complete 24 V, 150 Ah traction battery with PzB-type cells in a single plastic box: a cheaper yet reliable alternative to classic 24V 150Ah batteries in metal boxes, provided the dimensions match (665 x 138 x 549 mm).
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 160Ah traction battery MDL 2/160L, 624x192x510 mm
MIDAC 24V 160Ah traction battery MDL 2/160L, 624x192x510 mm
- Voltage – 24 V, capacity (C5) – 160 Ah
- Block MDL 2/160L – MDL cells (comply with DIN standard PzS)
- Dimensions (length x width x height) – 624 x 192 x 510 mm, weight – 121 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current: 20 – 32 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. The MDL 2/160L block is a complete 24 V, 160 Ah traction battery with PzS-type cells in a single plastic box: a cheaper yet reliable alternative to classical 24V 160Ah batteries in metal boxes, provided the dimensions match (624 x 192 x 510 mm).
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 180Ah traction battery MDL 2/180L, 624x192x510 mm
MIDAC 24V 180Ah traction battery MDL 2/180L, 624x192x510 mm
- Voltage – 24 V, capacity (C5) – 180 Ah
- Block MDL 2/180L – MDL cells (compliant with DIN standard PzS)
- Dimensions (length x width x height) – 624 x 192 x 510 mm, weight – 135 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current: 22.5 – 36 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. The MDL 2/180L block is a complete 24 V, 180 Ah traction battery with PzS type cells in a single plastic box: a cheaper yet reliable alternative to classic 24V 180Ah batteries in metal boxes, provided the dimensions match (624 x 192 x 510 mm).
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 180Ah traction battery MDL 2/180M, 624x192x570 mm
MIDAC 24V 180Ah traction battery MDL 2/180M, 624x192x570 mm
- Voltage – 24 V, capacity (C5) – 180 Ah
- MDL Block 2/180M – MDL cells (corresponds to DIN standard PzS)
- Dimensions (length x width x height) – 624 x 192 x 570 mm, weight – 138 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current: 22.5 – 36 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to PzS cells of the DIN standard, and MBS corresponds to PzB cells of the BS standard. The MDL 2/180M block is a complete 24 V, 180 Ah traction battery with PzS type cells in a single plastic box: a cheaper yet reliable alternative to classic 24V 180Ah batteries in metal boxes, provided the dimensions match (624 x 192 x 570 mm).
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 200Ah traction battery MBS 2/200, 665x138x660 mm
MIDAC 24V 200Ah traction battery MBS 2/200, 665x138x660 mm
- Voltage - 24 V, capacity (C5) - 200 Ah
- Blokas MBS 2/200 – MBS cells (compliant with BS standard PzB)
- Dimensions (length x width x height) – 665 x 138 x 660 mm, weight – 160 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current: 25 – 40 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS to BS standard PzB cells. The MBS 2/200 block is a complete 24 V, 200 Ah traction battery with PzB type cells in a single plastic box: a cheaper yet reliable alternative to classic 24V 200Ah batteries in metal boxes, provided the dimensions match (665 x 138 x 660 mm).
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 210Ah traction battery MDL 2/210H, 624x192x627 mm
MIDAC 24V 210Ah traction battery MDL 2/210H, 624x192x627 mm
- Voltage - 24 V, capacity (C5) - 210 Ah
- Block MDL 2/210H – MDL cells (corresponds to DIN standard PzS)
- Dimensions (length x width x height) – 624 x 192 x 627 mm, weight – 157 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current: 26.3 – 42 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. The MDL 2/210H block is a complete 24 V, 210 Ah traction battery with PzS-type cells in a single plastic box: a cheaper yet reliable alternative to classic 24V 210Ah batteries in metal boxes, provided the dimensions match (624 x 192 x 627 mm).
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 210Ah traction battery MDL 2/210M, 624x192x570 mm
MIDAC 24V 210Ah traction battery MDL 2/210M, 624x192x570 mm
- Voltage - 24 V, capacity (C5) - 210 Ah
- Blokas MDL 2/210M – MDL cells (complies with DIN standard PzS)
- Dimensions (length x width x height) – 624 x 192 x 570 mm, weight – 154 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current: 26.3 – 42 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. The MDL 2/210M unit is a complete 24 V, 210 Ah traction battery with PzS-type cells in a single plastic box: a cheaper, yet reliable alternative to classical 24V 210Ah batteries in metal boxes, provided the dimensions match (624 x 192 x 570 mm).
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 230Ah traction battery block MDL 2/230H, 624x192x627 mm
MIDAC 24V 230Ah traction battery block MDL 2/230H, 624x192x627 mm
- Voltage: 24 V, capacity (C5): 230 Ah
- Block MDL 2/230H – MDL cells (equivalent to DIN standard PzS)
- Dimensions (length x width x height) – 624 x 192 x 627 mm, weight – 166 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current – 28.8 – 46 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to PzS cells of the DIN standard, and MBS to PzB cells of the BS standard. The MDL 2/230H block is a complete 24 V, 230 Ah traction battery with PzS-type cells in a single plastic box: a cheaper yet reliable alternative to classic 24V 230Ah batteries in metal boxes, provided the dimensions match (624 x 192 x 627 mm).
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
-
MIDAC traction batteries for material handling equipment
MIDAC 24V 250Ah traction battery MDL 2/250H, 624x192x627 mm
MIDAC 24V 250Ah traction battery MDL 2/250H, 624x192x627 mm
- Voltage - 24 V, capacity (C5) - 250 Ah
- Block MDL 2/250H – MDL cells (comply with DIN standard PzS)
- Dimensions (length x width x height) – 624 x 192 x 627 mm, weight – 180 kg
- You can find the block drawing in PDF format under the „Technical Documents (PDF)“ section.“
- Recommended charging current: 31.3 – 50 A
Equivalents. MIDAC uses its own cell designation: MDL corresponds to DIN standard PzS cells, and MBS corresponds to BS standard PzB cells. The MDL 2/250H block is a complete 24 V, 250 Ah traction battery with PzS-type cells in a single plastic box: a more affordable yet reliable alternative to classic 24V 250Ah batteries in metal boxes, provided the dimensions match (624 x 192 x 627 mm).
MIDAC also manufactures standard-dimension liquid electrolyte traction batteries—monoblocs that are exclusively 24V. They are particularly widely used when a cheap and reliable solution is needed for loading and warehousing equipment. This is the same type of traction battery, except its casing is made of industrial plastic rather than metal, which allows production to be fully automated and results in a lower price. These batteries have the same lifespan as batteries in metal boxes—over 1,500 cycles.
How to read the traction battery designation?
On traction batteries, it is usually written, for example, 48V5PzS625Ah:
- 48V - battery voltage (24 cells of 2 V each);
- 5 - number of positive plates per cell;
- PzS – cell type according to DIN standard (PzB – according to the British BS standard, cells of a different height);
- 625Ah – capacity (C5), i.e. 5 plates of 125 Ah each.
MIDAC uses its own cell labeling: MDL complies with PzS, MBS – PzB, and the number after the letters indicates the capacity of a single plate. Therefore 48V5MDL125 is the same as 48V5PzS625Ah, o 24V2MDL125 the same as 24V2PzS250Ah. When choosing a replacement battery, it is important that the voltage, box dimensions (length x width x height), weight (forklift counterweight), and the layout of the terminals and plug match – which is why you will find a PDF drawing for each battery.
Recommended charging current - from capacity / 8 to capacity / 5, e.g., for a 500 Ah battery - 62.5–100 A.
This section covers the most popular liquid electrolyte traction batteries.




