Aprašymas
Video of a similar hoist (same model, but lower lift height - the video shows a model lifting to 800 mm instead of 1600 mm)
Smart and ergonomic joystick
Driving with a steep grip in narrow spaces
Ability to work with the handle in a vertical position not only makes it easier to pick up or put down the load, but also ensures safety. The tiller is held in place by a powerful spring, so it returns to neutral without impact when released.
Speed reduction in bends - The PSE12NMD model automatically reduces speed when cornering, increasing comfort and safety.
Reliability. Metal lid. The main lid is made of a sheet of metal 2 mm thick.
The handle of the tiller is made of automotive grade (PA6) plastic with 30% glass fibre for strength and stability
Lifting capacity 1200kg - with excellent residual power characteristics at the highest point (when lifting standard EURO pallets)
The narrow mast ensures excellent fork visibility, with a clear field of view unobstructed by mast sections, cylinders or chains. The operator always has a clear view of the forks, which considerably increases safety. Welded fork profiles ensure stability and durability. This is very important because the PSE12NMD is first and foremost a lifting device, and it is the forks that take the brunt of the load when lifting loads!
Technical parameters
| TECHNICAL SPECIFICATION BASED ON THE VDI198 STANDARD | ||||
| Basic data | 1.1 | Manufacturer | Noblelift | |
| 1.2 | MODEL | PSE12BM | ||
| 1.3 | Type | Fully electric | ||
| 1.4 | Operator (control) type | Followed by | ||
| 1.5 | Lifting power | Q (t) | 1.2 | |
| 1.6 | Centre of gravity | c (mm) | 600 | |
| 1.8 | Load centre (distance between front wheel axle and rear wheel axle) | x (mm) | 760 | |
| 1.9 | Wheel base | y (mm) | 1147 | |
| Weight | 2.1 | Own weight | kg | 530 |
| 2.2 | Unladen axle load, front/rear | kg | 375/155 | |
| 2.3 | Axle load, front/rear | kg | 500/1230 | |
| Castors, constructor | 3.1 | Castors | Polyurethane | |
| 3.2 | Drive wheel | φ x w (mm) | φ 210 x 75 | |
| 3.3 | Front wheel dimensions | φ x w (mm) | φ 84 x 93 | |
| 3.4 | Dimensions of support castors | φ x w (mm) | φ 100 x 50 | |
| 3.5 | Number of wheels front/rear (x = driving wheel) | 1x + 1 / 4 | ||
| 3.6 | Front track width | b10 (mm) | 550 | |
| 3.7 | Rear track width | b11 (mm) | 400 | |
| Dimensions | 4.2 | Height of lowered boom | h1 (mm) | 1930 |
| 4.3 | Free lifting | h2 (mm) | 1514 | |
| 4.4 | Lifting height | h3 (mm) | 1600 | |
| 4.9 | Joystick height in working position, min / max. | h14 (mm) | 710 /1150 | |
| 4.15 | Ground clearance of lowered forks | h13 (mm) | 90 | |
| 4.19 | Total length | l1 (mm) | 1710 | |
| 4.20 | Length to fork back | l2 (mm) | 560 | |
| 4.21 | Overall width | b1 (mm) | 800 | |
| 4.22 | Fork dimensions | s/e/l (mm) | 60 / 180 / 1150 | |
| 4.25 | Diagonal fork width | b5 (mm) | 570 | |
| 4.32 | Clearance at the centre of the wheel base | m2 (mm) | 24 | |
| 4.33 | Working corridor with pallet 1000X1200 taken across | Ast (mm) | 2197 | |
| 4.34 | Working corridor with longitudinal palette 800X1200 | Ast (mm) | 2145 | |
| 4.35 | Turning radius | Wa (mm) | 1350 | |
| Operating parameters | 5.1 | Driving speed, loaded/unloaded | Km/h | 4.2/4.5 |
| 5.2 | Lifting speed, loaded/unloaded | m/s | 0.11 / 0.14 | |
| 5.3 | Permit speed, loaded/unloaded | m/s | 0.13 / 0.11 | |
| 5.8 | Overcoming the biggest climb | % | 5/10 | |
| 5.10 | Service brake | Electromagnetic | ||
| Electric motors | 6.1 | Running engine power S2 60min | kW | 0.65 |
| 6.2 | Lifting engine power S3 10% | kW | 2.2 | |
| 6.3 | Battery type | AGM | ||
| 6.4 | Battery voltage and capacity at C5 | V/Ah | 2×12/85 | |
| 6.5 | Battery weight +/-5% | kg | 2×27 | |
| 6.6 | Energy consumption per VDI cycle | kWh/h | 0.60 | |
| Additional information | 8.1 | Type of drive for the driving motor | DC | |
| 10.4 | Noise level in the driver's ear according to EN 12053 | dB(A) | <70 | |
Drawing
