Shop
Showing 1081–1095 of 1352 resultsSorted by latest
-
Stackers (stackers)Noblelift RT20G - with 76.8V300Ah lithium battery
RT20G - designed for heavy-duty use with a powerful 76.8V300Ah lithium battery, powerful motors, ergonomic design and a host of safety features
- Lifting capacity - 1600 kg up to a height of 6500 mm.
- Battery - 76.8VV300Ah lithium iron phosphate
- Hydraulics control via mini levers (fully electronic proportional control)
- Electrical system - AC, all motors - AC
- With side fork advance, full set of lights
- Working corridor for full turn-around - ~ 2900 mm
- Reducer - German ZF GK 30
- Grammer seat
- Automatic fork alignment and centring
-
Batteries GEL, AGM, Pb and othersUS BATTERY US2200 (suitable for replacing TROJAN T105 or T125), double connectors
US Battery US2200 - high quality 6 V deep cycle traction battery for intensive professional use. „Diamond Plate Technology® ensures greater contact between the active mass and the electrolyte, resulting in longer life, better energy release and high cycle rates. Suitable as a replacement TROJAN T105 / T125 or Enersys 6FPT185 models. Made in USA.
-
Electric pallet trucksNoblelift APT 15 - autonomous pallet truck
- Self-propelled self-propelled lift - a trolley designed to take a load from one place to another, e.g. from a production site to a warehouse and back again.
- It scans the environment by itself, just set a start and end point and follow the route once. And you're ready to go. The operator just needs to start the operations and plug in for charging when finished (automatic charging station available separately).
- Easy integration with other systems - API works via XML
- Automatic charging station available separately
- Price does not include initial start-up
-
Batteries GEL, AGM, Pb and othersDiscover EV22A-A (12V58Ah) battery
This model is widely used in floor cleaning machines and scissor carts such as the Noblelift ACX10E and others.
DISCOVER DRY CELL AGMs are deep cycle traction batteries adapted to real working conditions - i.e. they can be quickly recharged with a charger of the appropriate capacity, can „tolerate” partial recharges during the course of the day, can withstand high instantaneous loads, have a higher energy density than GEL batteries, withstand well outdoor conditions, can be permanently left connected to the charger, etc. Ideal for installation in new machinery and for replacing batteries that have already been used up. Simply select the right charger algorithm and the Discover EV22A-A will work long and reliably.
Remark:
- Always make sure you use the correct charging algorithm. DISCOVER AGM battery is suitable for all classic AGM charging algorithms that have a balancing mode (recommended), and is also suitable for charging with constant current and constant voltage (up to 2.45V/cycle) chargers, but strictly not for starter AGM battery chargers. I.e. EXIDE, Sonnenchein GEL or DISCOVER GEL charging algorithms are suitable for them as they all have a balancing mode.
- If you have had to undercharge the battery during the day, we recommend that you leave the battery overnight after the work to recharge it fully - this will fully compensate for the damage caused by undercharging (as a single undercharge can destroy between 3 and 6 cycles of the battery's lifetime, which is about 450 cycles at a discharge depth of 80%, or about 500 to 700 at a discharge depth of 70%).
-
For scissor platforms, towersTrojan T1275 (12V150Ah@C20 original)
The TROJAN T1275 is one of the few liquid electrolyte batteries designed to be discharged with 100%. Made in the USA.
-
Support castorsSupport wheel 150 x 40 mm 224443
- Full name - 150/ 40-125/5K-S 6005-2RS NL:50 EL:55 O. ISPB (BO:13)
- Designed for high-intensity work
- Delivery time: 3 - 4 days.
- Full wheel drawing for checking - attached PDF document (or we can check by manufacturer, model and serial number - just write this information in the order notes).
-
Batteries GEL, AGM, Pb and othersDiscover EV512A-70 battery
DISCOVER DRY CELL AGMs are deep cycle traction batteries adapted to real working conditions - i.e. they can be quickly recharged with a charger of the appropriate capacity, can „tolerate” partial recharges during the course of the day, can withstand high instantaneous loads, have a higher energy density than GEL batteries, withstand well outdoor conditions, can be permanently left connected to the charger, etc. Ideal for installation in new machinery and for replacing batteries that have already been used up. Simply select the right charger algorithm and the Discover EV512A-70 will work long and reliably.
Remark:
- Always make sure you use the correct charging algorithm. DISCOVER AGM battery is suitable for all classic AGM charging algorithms that have a balancing mode (recommended), and is also suitable for charging with constant current and constant voltage (up to 2.45V/cycle) chargers, but strictly not for starter AGM battery chargers. I.e. EXIDE, Sonnenchein GEL or DISCOVER GEL charging algorithms are suitable for them as they all have a balancing mode.
- If you have had to undercharge the battery during the day, we recommend that you leave the battery overnight after the work to recharge it fully - this will fully compensate for the damage caused by undercharging (as a single undercharge can destroy between 3 and 6 cycles of the battery's lifetime, which is about 450 cycles at a discharge depth of 80%, or about 500 to 700 at a discharge depth of 70%).
- All the information you need on how to use AGM batteries correctly, click here:
-
Mechanical pallet trucksPallet truck PRAMAC - LIFTER GS EVO: 2500 kg, 800 mm, 36 months warranty
- Fork length - 800 mm, lifting capacity - 2500 kg, polyurethane wheels (non-lubricating and soft-rolling)
- 36 months warranty on your hydraulic pump!
- Manufacturer LIFTER (PRAMAC) - the generic name for hydraulic pallet trucks - „liftior” - from the same manufacturer”
- Features an ergonomic, patented handle shape that can be „rested” on the body when pushing the load, saving up to 3/4 of the force needed to push the load
- Steering wheel rims - aluminium
- Characterised by extremely quiet operation
-
Load wheels (for stackers)Load wheel 200 x 110 mm P400936
- Full name - VS 200/110-165/9K 4×6209-2RS NL:110 EL:110
- Designed for high-intensity work
- Delivery time: 3 - 4 days.
- Full wheel drawing for checking - attached PDF document (or we can check by manufacturer, model and serial number - just write this information in the order notes).
-
Load wheels (for stackers)Load wheel 350 x 106 mm 251015
- Full name - VG 350/106-300/KE-(BR)-S BO:14 NL:80 AS:6/200 BO:16
- Designed for high-intensity work
- Delivery time: 3 - 4 days.
- Full wheel drawing for checking - attached PDF document (or we can check by manufacturer, model and serial number - just write this information in the order notes).
-
Load wheels (for stackers)Load wheel 350 x 106 mm 258041
- Full name - VG 350/106-300/KE-(BR)-S BO:14 NL:80 AS:6/170 BO:16
- For medium-high-intensity work
- Delivery time: 3 - 4 days.
- Full wheel drawing for checking - attached PDF document (or we can check by manufacturer, model and serial number - just write this information in the order notes).
-
Load wheels (for stackers)Load wheel 310 x 102 mm 224498
- Full name - VG 310/102-255/8K+12K-(BR)-S 6012-2RS/6308-2RS NL: 77,5 O. ISPB
- Designed for high-intensity work
- Delivery time: 3 - 4 days.
- Full wheel drawing for checking - attached PDF document (or we can check by manufacturer, model and serial number - just write this information in the order notes).
-
Load wheels (for stackers)Load wheel 300 x 106 mm 258074
- Full name - VG 300/106-256/KE-(BR)-S BO:14 NL:80 AS:6/170 BO:16
- Designed for high-intensity work
- Delivery time: 3 - 4 days.
- Full wheel drawing for checking - attached PDF document (or we can check by manufacturer, model and serial number - just write this information in the order notes).
-
Load wheels (for stackers)Load wheel 300 x 106 mm 235593
- Full name - VG 300/106-256/10KE-S BO:14 NL:80
- Designed for high-intensity work
- Delivery time: 3 - 4 days.
- Full wheel drawing for checking - attached PDF document (or we can check by manufacturer, model and serial number - just write this information in the order notes).
-
Load wheels (for stackers)Load wheel 300 x 100 mm P400855
- Full name - PG 300/100-250/10K-S 6210-2RS-C3 NL:100 EL:83,8 EN:113
- For medium-intensity work
- Delivery time: 3 - 4 days.
- Full wheel drawing for checking - attached PDF document (or we can check by manufacturer, model and serial number - just write this information in the order notes).
