Ability to work with the handle in a vertical position not only makes it easier to pick up or put down the load, but also ensures safety. The tiller is held in place by a powerful spring, so it returns to neutral without impact when released. Speed reduction in bends - The PSE model automatically reduces speed when cornering, increasing working comfort and safety.
Reliability
Metal lid. The main cover is made of a thick sheet of metal - 2 mm thick.
The handle of the tiller is made of automotive grade (PA6) plastic with 30% glass fibre for strength and stability
Lifting capacity 1200kg - with excellent residual power characteristics at the highest point (when lifting standard EURO pallets) REAL Mast PROFILES used in the lifting mechanism - no cheap folded solutions are used, so the lifting mechanism will have a long and reliable service life and good lifting performance
The wide mast ensures excellent fork visibility, with a clear field of view unobstructed by mast sections, cylinders or chains.
The operator always has a clear view of the forks, which significantly increases work safety
Welded fork profiles ensure stability and durability. This is very important because the PSE 12B is primarily a lifting device, and it is the forks that receive the greatest load when lifting loads!
Another particularly practical feature of this model is Lift height and capacity chart - For any machine that lifts a load to a height, the residual power of the lift starts to decrease from a certain height. Noblelift PSE12B models are equipped with a visual ruler that clearly shows the residual lifting capacity at a given height. A very simple yet extremely practical solution😊
TECHNICAL INFORMATION
Model
PS E12N (Lithium batteries)
Standard
Type
Self-propelled lifting and travel
Operator position
Pedestrian (walk-behind)
Rated capacity
kg
1200
Load centre
mm
600
Wheel base
mm
1147
Service weight
kg
620
Wheel type
Polyurethane
Fork wheels
Single
Stabiliser wheel
Yes
Tiller arm height
mm
710/1150
Total length
mm
1710
Overall width
mm
800
Mast type
Standard duplex
Free lift
mm
-
Initial lift function
mm
-
Fork dimensions
mm
60/180/1150
Ground clearance
mm
26
Travel speed
km/h
4,5-4,7
Proportional lift control
-
Turning radius
mm
1350
Turning circle
mm
2145
Continuous operating time
h
3 - 5 hours.
operation with a fully charged battery
Gradeability: loaded/unloaded
%
5 / 10
Lift motor
kW
2.2
Drive motor
kW
0.65
Batteries (24V system)
V/Ah
2x 12V60Ah Lithium Iron Phosphate
Charger
Integrated, 220V, 24V25A
Note: Lift trucks with lithium batteries have a slightly different start-up than that shown in the general video. For safety reasons, the battery needs to be switched on (activated) before the stacker can be started - Noblelift's stackers are designed in such a way that when the work is finished and in order to avoid any unnecessary risks, the lithium battery controller disconnects any power supply to the stacker, and then in order to start it again, the battery activation button needs to be pressed next to the „mass” switch, in the same way as shown in the video (although the video is of a different stacker with an initial lift-up function - i.e.i.e. the support legs, although this particular stacker does not have this option).
The Noblelift ERA25 EASY ROLLER has a mechanical drive in addition to the standard pallet truck functions. For heavy loads or to move the load, you can activate the mechanical drive and move the load effortlessly with a flick of the handle.