Aprašymas
Smart cleaning in the palm of your hand
Discover the simplicity and efficiency of smart cleaning with the ANB450 autonomous cleaning robot. Powered by a powerful Nvidia processing chip boasting 32 TOPS Al (DI) performance. With just a tap of the intuitive mobile app or the 10.1“ touchscreen on the robot itself, you can effortlessly manage a wide range of cleaning tasks. The ANB450 has advanced stain and liquid detection, powered by Al's powerful features, ensuring thorough and accurate cleaning. The AI capabilities redefine cleaning standards with extremely broad applicability to real working conditions. Improve your cleaning routine with the ANB450, where smart cleaning is in the palm of your hand.
Security
The ANB450 is protected by a protective shield and is controlled by a full range of sensors: a 32-beam 3D LiDAR radar, 3D depth cameras and a bumper sensor. Combined with Noblelift's powerful algorithms, these sensors create an impenetrable safety net, ensuring that the ANB450 navigates precisely within the defined space and avoids obstacles seamlessly. Trust the ANB450 cleaning experience that prioritises safety without compromise
Simplified maintenance
The ANB450 introduces a revolutionary charging and water change station (available separately) that increases cleaning autonomy to 24 hours a day, 7 days a week and drastically reduces the need for maintenance. This intelligent station allows water/detergent („chemistry") changes and charges the robot, ensuring operation without manual intervention. The station is equipped with a magnetic brush (to scrape off dirt as the robot connects to the station), an auto-connecting charger, an additional pump to feed dirty water into the waste water system, an additional water hose to flush the robot itself and a separate control panel (lockable) for manual operation of the station - especially important for robot maintenance. Maintenance work is also greatly simplified by the ability to change the drainage rubber in just 30 seconds.
Sustainability
The ANB45O uses an advanced water-saving system that reduces the use of water and detergents. The robot adjusts the water flow according to the speed, making it not just cleaning, it's responsible cleaning.
Technical specification
| Dimensions | |
| Length | 810 mm |
| Width (without desiccant) | 615 mm |
| Height | 1075 mm |
| Weight | 150 kg |
| Area to be cleaned | 450 mm |
| Width of dehumidifier | 740 mm |
| Cleaning parameters | |
| Maximum theoretical efficiency | 1944 m2/hr |
| Brush pressure | 125 kg |
| Brush rotation speed | 270 RPM |
| Clean water tank capacity | 38 L |
| Dirty water tank capacity | 36 L |
| Operating parameters | |
| Maximum speed | 1.2 m/s or 4.32 km/h |
| Minimum possible distance to the wall | 3 cm |
| Minimum distance travelled | 810 mm |
| Minimum turning distance | 1100 mm |
| A hill to climb | 8% |
| Power plant parameters | |
| Type of Betria | Lithium iron phosphates |
| Battery capacity | 80 Ah |
| Rated voltage | 24 VDC |
| Charging time | 2.7 hours |
| Longest uninterrupted working hours | 4.5 hours |
| Security measures | |
| Sensors | 3D LiDAR, 3D depth camera, bumper sensor, IMU sensor (for acceleration, yaw angles) |
| Noise level | Not less than 66 dB (A) |
| Key components | |
| Processor | Nvidia processor with 32 TOPS DI performance |
| Location sensor | 3D LiDAR with 150m range |

















