Description
| Smart and ergonomic joystick | |
 |
|
| Driving with a steep grip in narrow spaces | |
 |
|
| Ability to work with the handle in a vertical position not only makes it easier to pick up or put down the load, but also ensures safety. The tiller is held in place by a powerful spring, so it returns to neutral without impact when released. Speed reduction in bends - The PSE model automatically reduces speed when cornering, increasing working comfort and safety. |
|
| Reliability | |
| Metal lid. The main cover is made of a thick sheet of metal - 2 mm thick. |  |
| The handle of the tiller is made of automotive grade (PA6) plastic with 30% glass fibre for strength and stability |  |
| Lifting capacity 1200kg - with excellent residual power characteristics at the highest point (when lifting standard EURO pallets) REAL BOOM PROFILES used in the lifting mechanism - no cheap folded solutions are used, so the lifting mechanism will have a long and reliable service life and good lifting performance |
 |
| The wide mast ensures excellent fork visibility, with a clear field of view unobstructed by mast sections, cylinders or chains. |  |
| The operator always has a clear view of the forks, which significantly increases work safety |  |
| Welded fork profiles ensure stability and durability. This is very important because the PSE 12B is primarily a lifting device, and it is the forks that receive the greatest load when lifting loads! |  |
| Another particularly practical feature of this model is Lifting height and power ruler - For any machine that lifts a load to a height, the residual power of the lift starts to decrease from a certain height. Noblelift PSE12B models are equipped with a visual ruler that clearly shows the residual lifting capacity at a given height. A very simple yet extremely practical solution😊 |  |
This video shows another PSE series hoist with a tilt function (with a lithium battery, while this particular model is with AGM batteries):
The PSE12BD has the same characteristics as other PSE12B lifts without the stepping function:
TECHNICAL INFORMATION
| Technical specification according to VDI 2198 | ||||
| Description | 1.2 | Model | PSE12BD | |
| 2600-3600 | ||||
| 1.3 | Type | Electric | ||
| 1.4 | Control method (operator position) | Followed by | ||
| Lifting capacity | Q(t) | 1.3* | ||
| 1.5 | Lifting power (boom lift) | Q(t) | 1.2 | |
| Lifting capacity (straddle legs) | Q(t) | 1.2 | ||
| 1.6 | Centre of gravity (load) | c(mm) | 600 | |
| 1.8 | Load arm, between the centre of the chassis wheels and the forks | x(mm) | 835 / 752 | |
| 1.9 | Wheel base | y(mm) | 1264 / 1181 | |
| Weights | 2.1 | Own weight | kg | 700 |
| 2.2 | Axle load, Loaded front/rear | kg | 505 / 195 | |
| 2.3 | Axle load, unladen front/rear | kg | 680 / 1220 | |
| Wheels / chassis | 3.1 | Castors | Polyurethane | |
| 3.2 | Wheel dimensions, front | φxw (mm) | φ210×70 | |
| 3.3 | Wheel dimensions, rear | φxw (mm) | φ84×93 | |
| 3.4 | Extra wheels (dimensions) | φxw (mm) | φ100×50 | |
| 3.5 | Wheels, number front/rear (x = driving wheels) | 1x + 1 / 2 | ||
| 3.6 | Cancer, anterior | b10(mm) | 550 | |
| 3.7 | Cancer, rear | b11(mm) | 400/515 | |
| Dimensions | 4.2 | Height, mast lowered | h,(mm) | See table below |
| 4.3 | Free lifting | h2(mm) | 0 | |
| 4.4 | Lifting height | h3(mm) | See table below | |
| 4.5 | Height, mast raised | h4(mm) | See table below | |
| 4.6 | Initial lifting | h5(mm) | 120 | |
| 4.9 | Joystick height in driving position min./max. | h14(mm) | 710 /1150 | |
| 4.15 | Height, lowered | h13 (mm) | 86 | |
| 4.19 | Total length | l,(mm) | 1752 | |
| 4.20 | Length of fork to back | I2(mm) | 602 | |
| 4.21 | Overall width | b,(mm) | 800 | |
| 4.22 | Fork dimensions DIN ISO 2331 | s/e/I (mm) | 60 / 180 / 1150 | |
| 4.25 | Fork width | b5(mm) | 570 | |
| 4.32 | Prošvaiste, wheel base centre | m2(mm) | 24 | |
| 4.33 | Working aisle width for pallets 1000×1200 mm (taken across) | Ast(mm) | 2290 / 2234* | |
| 4.34 | Working aisle width for pallets 800×1200 (taken lengthways) | Ast(mm) | 2209 / 2185* | |
| 4.35 | Turning radius | Wa(mm) | 1467 / 1384* | |
| Operating parameters | 5.1 | Driving speed, loaded/unloaded | km/h | 4.2 / 4.5 |
| 5.2 | Lifting speed, loaded/unloaded | mission | 0.11 / 0.16 | |
| 5.3 | Permit speed, loaded/unloaded | mission | 0.13 / 0.11 | |
| 5.8 | Maximum hill climbing capacity, loaded/unloaded | % | 5/10 | |
| 5.10 | Service brake | Electromagnetic | ||
| Electrical parameters | 6.1 | Running engine power S2 60min | kW | 0.65 |
| 6.2 | Lifting engine power S3 4,5% | kW | 2.2 | |
| 6.3 | Battery, reminatis DIN 43531/35/36 A, B, C, no | |||
| 6.4 | Battery voltage / capacity C5 | V/Ah | 2x12V85Ah | |
| 6.5 | Weight of matter, min.+/- 5% | kg | 2×27 kg | |
| 6.6 | Energy consumption according to DIN EN 16796 | kWh/h | 0,66 | |
| Additional info. | 8.1 | Engine type | Direct Current (DC) | |
| 8.4 | Sound level in the operator's ear according to EN 12053 | dB(A) | <70 | |
*Some parameters are different when a pallet is placed on the support legs
Table of lifting and structural heights
| Boom type | Height of lowered str. h1 (mm) | Free lift h2(mm) | Lifting height h3(mm) | Height of raised boom h4(mm) | Total lift (boom + legs) h3 + h13(mm) |
| Double | 1820 | 0 | 2514 | 3070 | 2600 |
| 1970 | 0 | 2814 | 3370 | 2900 | |
| 2120 | 0 | 3114 | 3677 | 3200 | |
| 2320 | 0 | 3514 | 4077 | 3600 |
