Noblelift SC06E scissor platform

With AGM batteries
Ultra-small and compact - fits in lifts and can pass through low door frames
ZAPI controller (EU)
Fully electric power plant - both lifting and driving
Suitable for indoor and outdoor use
Compliant with the latest EU requirements - specially designed for our market
Proportional lifting control - adjustable lifting intensity and smoothness
Extends the length of the cradle (effortlessly, comfortably locks in place)
Floors with special non-slip coating, rough
Includes lugs for both forklift fork transfer and sling hooks
Dual control - both from the cradle via the multi-function joystick and from the control panel in the lift body
Has a 220V socket in the cradle

(including VAT: 8270,35 €)

In Stock

Aprašymas

PRODUCT DESCRIPTION AND BENEFITS


	The SC06(E) series lifts are very compact and can be used in confined spaces such as lifts. With a single operator, work can be carried out continuously, as the lift is controlled via a control panel on the platform. The electrical components compartment, located between the chassis axles, provides easy access for parts replacement or servicing For easier maintenance, the lift and chassis are equipped with automatic displays for information messages and codes Portable control box makes it easy for the operator to work outside the hoist


Mechanically disengageable gear SC Series lifts can be repositioned in the event of a power failure	Moto Hour Meter Automatically records the lift's moto hours. The operator can plan periodic maintenance based on these

Error code display Simple fault identification and easy maintenance	Emergency lowering system In the event of a power failure, the emergency lowering system will safely lower the operator down

Scissor mechanism lock Allows safe maintenance work - the scissor mechanism will not automatically lower itself	Self-locking gates Self-locking entrance gates ensure operator safety

Main power switch When the SC Series is not in use for an extended period of time, pressing this switch will disconnect the power supply and thus avoid draining the battery.	Charging protection system When the battery is fully charged, the system cuts off the power, protecting the battery and charger.

Signal lamp Signal lamp switches on during lift operation	Emergency stop button Both control panels have emergency stop buttons. In the event of an accident, pressing the button instantly stops the hoist's movement and ensures operator safety

Pothole protection system When the lift goes up, the pothole protection system deploys automatically. This is particularly important when working on uneven surfaces	Automatic braking system Automatic braking system for safe operation when parking on slopes

Tilt protection When the hoist exceeds the specified permissible angle of inclination, the system will warn and stop the hoist. .	Sound and motion signal Audible warning signal during hoist movement

Convenient maintenance Maintenance is facilitated by easy access to electrical components on both sides of the housing	Proportional lifting handle Allows comfortable control of lifting and driving speed

Lift cradle extension The extension of the cradle floor allows you to work over obstacles and increases the working area	Portable control panel Thanks to the portable control panel, the operator can operate the lift from the operator's side

Low lift height SC series lifts can pass at limited working heights	Front-wheel drive and steering Thanks to its small turning radius, the SC Series is suitable for working in tight spaces.

Technical parameters

No.	Parameter	SC06E
1	Safe Operating Weight (S.D.W.)	240 kg
2	S.D.S. on extended platform	100kg
3	Maximum number of employees (internal)	2
4	Maximum number of employees (outdoor)	/
5	Maximum working height (h2)	5,9 m
6	Maximum platform floor height (h1)	3,9 m
7	Total length (l1)	1.44 m
8	Overall width (w1)	0.76 m
9	Overall height (with cradle protection raised) (h4)	2.03 m
10	Overall height (with cradle guard down) (h3)	1.87 m
11	Platform size (length/width)	1.29×0.7m
12	The platform is lengthening	0.6m
13	Clearance (lowered)	0.06 m
14	Promenade (Pakeltos)	0.015 m
15	Wheel base	1.05 m
16	Minimum turning circle (inner/outer)	1.55m
17	Lifting motor, kW	24V/0.4kw
18	Driving motor, kW	24V/1.5
19	Driving speed (Lowered)	4.0km/h
20	Driving speed (Raised)	0.5 km/h
21	Lifting/lowering time	25/27s
22	Batteries	2x12V/85Ah
23	Built-in charger	24V/15Ah
24	Overcomes downhill / uphill	25%
25	Maximum tilt (outside/inside)	1.5°/3°
26	Wheels	230x80mm
27	Own weight	895 kg