Minimum quantity should be 4 of "Fullriver FFD245-6 AGM battery, 6V245Ah, suitable to replace TE35"
Sale!
Discover EV512RG-103 battery (105-pack)
DISCOVER GEL - deep cycle traction batteries adapted to real working conditions - i.e. they can be quickly recharged with a charger of the appropriate capacity, they can „tolerate” partial recharges during the course of the day, and they are the perfect substitute for EXIDE GEL or Sonnenchein GEL batteries (e.g. GF 12105, etc).
Discover® DRY CELL industrial traction and deep cycle batteries are “TRUE GEL” batteries and are suitable for both replacing end-of-life batteries and for fitting to new equipment. The batteries provide exceptional durability even under partial charging and/or high ambient temperature operating conditions. DISCOVER GEL batteries have more cycles than Discover AGM batteries, making them ideal for demanding energy storage applications.
Remark:
Always make sure you use the correct charging algorithm. The DISCOVER GEL battery is suitable for all classic GEL charging algorithms that have a balancing mode such as EXIDE, Sonnenchein GEL (market standard), etc.
If you have had to undercharge the battery during the day, we recommend that you leave the battery overnight after the work to recharge it fully - in this case the damage caused by undercharging is fully compensated for (as one undercharge can destroy between 3 and 6 cycles of the battery's lifetime, which in total is about 550 cycles at a depth of discharge of 80%, or about 600 to 900 cycles at a discharge depth of 70%).
The manufacturer declares that DISCOVER GEL batteries can be partly recharged during the day if necessary (e.g. to allow enough time for the evening shift). In such cases, it is very important to be aware that partial charges can only be carried out with chargers that have the DISCOVER GEL charging algorithm installed and, very importantly, that the equipment is left on full charge overnight on the days on which the partial charges were carried out, in order to compensate for the damage caused by the partial charges.
OUTSTANDING FEATURES OF GEL CELL BATTERIES
IMPROVED LEAD ALLOYS - Thick graphite-enriched alloy plates maintain maximum lifetime
CARBON REINFORCEMENT - Carbon additives improve cycling performance, charge acceptance and protect against partial charge damage
AUTOMATIC INTER-COMPARTMENT WELDING - Improved consistency of welding between cell sections, which saves lead compared to manual welding. Withstands higher currents and at the same time has lower internal resistance
POLYPROPYLENE HOUSING - High heat resistance and reliability. High-precision pressure regulating valves reduce water loss and extend service life. Integrated spark arrestors protect against fire and explosion
MAIN FEATURES
Constant Ah capacity throughout lifetime
Long lifetime compared to other liquid electrolyte / AGM / Gel batteries
600+ cycles at 70% IG (IEC 254-1Train Lead Acid)
450+ cycles 100% IG (DIN 43 539 VRLA)”
Can operate at cooler temperatures than AGMs
Can operate at lower temperatures than liquid electrolyte batteries
These chargers are more energy efficient. During charging, the electric current is made up of individually modulated (on demand) DC pulses of different widths (hence the name high-frequency chargers), which results in a significantly lower heating of the battery being charged, as the average current is lower than with conventional chargers, while at the same time increasing the overall energy efficiency of the charging process, reducing adverse side effects such as water electrolysis and the formation of insoluble lead layers. Therefore, we always recommend the use of these chargers in high-intensity or aggressive working conditions.
These chargers are more energy efficient. During charging, the electric current is made up of individually modulated (on demand) DC pulses of different widths (hence the name high-frequency chargers), which results in a significantly lower heating of the battery being charged, as the average current is lower than with conventional chargers, while at the same time increasing the overall energy efficiency of the charging process, reducing adverse side effects such as water electrolysis and the formation of insoluble lead layers. Therefore, we always recommend the use of these chargers in high-intensity or aggressive working conditions.
Voltage: 6V, capacity: 224Ah@C20 or 180Ah@C5, dimensions – 260 x 180 x 272 mm, weight – 30.5 kg. Perfectly suited to replace TROJAN T105/T125 batteries, you just need to set the AGM charging mode
Fullriver Full Force maintenance-free AGM batteries are designed for reliable cyclic operation and a long service life. Manufactured using 99.994% pure lead and thick plates, they feature high capacity, fast charging, vibration resistance, and are completely maintenance-free. The sealed AGM construction prevents electrolyte leakage and allows the battery to be installed in virtually any orientation.
It handles heavy loads very well – the manufacturer even specifies a cranking current of 900A, which is a lot for a deep-cycle battery.
185,00 €Original price was: 185,00 €.165,00 €Current price is: 165,00 €. (including VAT: 199,65 €)Add to cart
Voltage – 12V, capacity – 55Ah@C20 or 45Ah@C5, dimensions – 229 x 138 x 212 mm (height with terminal bolts – 215 mm (terminals with M6 bolts), weight – 16,4 kg.
Fullriver Full Force maintenance-free AGM batteries are designed for reliable cyclic operation and a long service life. Manufactured using 99.994% pure lead and thick plates, they feature high capacity, fast charging, vibration resistance, and are completely maintenance-free. The sealed AGM construction prevents electrolyte leakage and allows the battery to be installed in virtually any orientation.
Handles high loads very well – the manufacturer even specifies a cranking current of 350A, which is a lot for a deep-cycle battery
125,00 €Original price was: 125,00 €.110,00 €Current price is: 110,00 €. (including VAT: 133,10 €)Add to cart
This model is widely used in floor cleaning machines, scissor carts etc.
DISCOVER DRY CELL AGMs are deep cycle traction batteries adapted to real working conditions - i.e. they can be quickly recharged with a charger of the appropriate capacity, can „tolerate” partial recharges during the course of the day, can withstand high instantaneous loads, have a higher energy density than GEL batteries, withstand well outdoor conditions, can be permanently left connected to the charger, etc. Ideal for installation in new machinery and for replacing batteries that have already been used up. Simply select the right charger algorithm and the Discover Discover EVU1A-A deep cycle AGM battery will provide long and reliable service.
Remark:
Always make sure you use the correct charging algorithm. DISCOVER AGM battery is suitable for all classic AGM charging algorithms that have a balancing mode (recommended), and is also suitable for charging with constant current and constant voltage (up to 2.45V/cycle) chargers, but strictly not for starter AGM battery chargers. I.e. EXIDE, Sonnenchein GEL or DISCOVER GEL charging algorithms are suitable for them as they all have a balancing mode.
If you have had to undercharge the battery during the day, we recommend that you leave the battery overnight after the work to recharge it fully - this will fully compensate for the damage caused by undercharging (as a single undercharge can destroy between 3 and 6 cycles of the battery's lifetime, which is about 450 cycles at a discharge depth of 80%, or about 500 to 700 at a discharge depth of 70%).
