Aprašymas
| Smart and ergonomic joystick | |
 |
|
| Driving with a steep grip in narrow spaces | |
 |
|
| Ability to work with the handle in a vertical position not only makes it easier to pick up or put down the load, but also ensures safety. The tiller is held in place by a powerful spring, so it returns to neutral without impact when released. Speed reduction in bends - The PSE model automatically reduces speed when cornering, increasing working comfort and safety. |
|
| Reliability | |
| Metal lid. The main cover is made of a thick sheet of metal - 2 mm thick. |  |
| The handle of the tiller is made of automotive grade (PA6) plastic with 30% glass fibre for strength and stability |  |
| Lifting capacity 1200kg - with excellent residual power characteristics at the highest point (when lifting standard EURO pallets) REAL BOOM PROFILES used in the lifting mechanism - no cheap folded solutions are used, so the lifting mechanism will have a long and reliable service life and good lifting performance |
 |
| The wide mast ensures excellent fork visibility, with a clear field of view unobstructed by mast sections, cylinders or chains. |  |
| The operator always has a clear view of the forks, which significantly increases work safety |  |
| Welded fork profiles ensure stability and durability. This is very important because the PSE 12B is primarily a lifting device, and it is the forks that receive the greatest load when lifting loads! |  |
| Another particularly practical feature of this model is Lifting height and power ruler - For any machine that lifts a load to a height, the residual power of the lift starts to decrease from a certain height. Noblelift PSE12B models are equipped with a visual ruler that clearly shows the residual lifting capacity at a given height. A very simple yet extremely practical solution😊 |  |
TECHNICAL INFORMATION
| Model | PS E12N (Lithium batteries) | |
| Standard | ||
| Type | Lift and drive yourself | |
| Operator position | Follows behind | |
| Lifting power | kg | 1200 |
| Centre of gravity | mm | 600 |
| Wheel base | mm | 1147 |
| Own weight | kg | 620 |
| Type of castors | Polyurethane | |
| Wheels of Šakiai | Single | |
| Support wheel | Yes | |
| Elevation of Vairalazde | mm | 710/1150 |
| Total length | mm | 1710 |
| Overall width | mm | 800 |
| Boom type | Standard double | |
| Free lifting | mm | - |
| Start-up function | mm | - |
| Fork dimensions | mm | 60/180/1150 |
| The Breakthrough | mm | 26 |
| Driving speed | km/h | 4,5-4,7 |
| Proportional lift control | - | |
| Turning radius | mm | 1350 |
| Full turning circle | mm | 2145 |
| Autonomous continuous | pm. | 3 - 5 hours. |
| operation with a fully charged battery | ||
| Hill climbing: loaded/unloaded | % | 5 / 10 |
| Lifting engine | kW | 2.2 |
| Driving engine | kW | 0.65 |
| Batteries (24V system) | V/Ah | 2x 12V60Ah Lithium Iron Phosphate |
| Charger | Integrated, 220V, 24V25A | |
Note: Lift trucks with lithium batteries have a slightly different start-up than that shown in the general video. For safety reasons, the battery needs to be switched on (activated) before the hoist can be started - Noblelift's hoists are designed in such a way that when the work is finished and in order to avoid any unnecessary risks, the lithium battery controller disconnects any power supply to the hoist, and then in order to start it again, the battery activation button needs to be pressed next to the „mass” switch, in the same way as shown in the video (although the video is of a different hoist with an initial start-up function - i.e.i.e. the support legs, although this particular hoist does not have this option).
