Aprašymas
 |
 |
| Proportional lifting and lowering of hydraulics The electronically controlled proportional lifting system allows proportional control of lifting speed and intensity and ensures precise load positioning at any lifting height. This is particularly important when loads need to be stacked high, especially when targeting top shelves, or when loads need to be raised or lowered gently. |
The long tiller makes working ergonomic and safe The operator can always keep a safe distance from the lift, making the job comfortable and fast. With a long tiller, less effort is needed to make turns. The working height of the handle is naturally adapted to the most comfortable operating position for the operator. The four-wheel design with a side-mounted handle ensures a particularly good view of the forks and the stability of the lift |
 |
 |
| Robust and reliable design The frame is even 8 mm thick, so the chassis is well protected against impacts. The battery compartment is also made of sheet steel and has a metal cover, which also adds to the reliability of the system and allows it to maintain its cosmetic appearance for a long time. The hoist has a vertically integrated AC motor with an electromagnetic brake, which makes it less sensitive to environmental dust. The electric drive has an IP54 protection rating (protection against dust and water spray) |
CAN - BUS technology CAN communication is used for all signals in the electrical part of the system to improve the stability and reliability of the lift. If required, it is possible to connect with a handheld programming console or a PC to perform additional diagnostics, software updates, troubleshooting or to set up parameters such as travel or lifting speeds, braking intensity, etc. - in other words, the lift can be further customised to meet individual customer requirements |
 |
 |
| Easy maintenance The design of the lifts and the components used are tailored to make them easy to access and maintain. The metal protective cover is removed by unscrewing 2 screws. The drive wheel, support wheel and fork wheels are easy to change without lifting the forklift. And with the Waterless Technology battery, you only need to refill the battery once every 2 - 3 months! |
Major internal components from EU manufacturers. The powerful maintenance-free German Schabmueller AC motor with German Kordel gearbox, Intorqe electromagnetic brake, German REMA tiller, ZAPI or CURTIS electric drives and Wicke drive wheel combine to provide the best in performance, precision, efficiency and reliability, and these top brands reduce overall running costs. |
Technical specification
| Description | 1.2 | Model | PS20L (2900 - 4600) | |
| 1.3 | Type | Electric | ||
| 1.4 | Control method (operator position) | Followed by | ||
| 1.5 | Q(t) | Lifting power | 2.0 | |
| 1.6 | c(mm) | Centre of gravity (load) | 600 | |
| 1.8 | x(mm) | Load arm, between the centre of the chassis wheels and the forks | 647 | |
| 1.9 | y(mm) | Wheel base | 1 429 | |
| Weights | 2.1 | kg | Own weight | 1 579 |
| 2.2 | kg | Axle load, Loaded front/rear | 1000/2579 | |
| 2.3 | kg | Axle load, unladen front/rear | 900/679 | |
| Wheels / chassis | 3.1 | Castors | Polyurethane (PU) | |
| 3.2 | φ(mm) | Wheel dimensions, front | φ230×70 | |
| 3.3 | φ(mm) | Wheel dimensions, rear | φ84×70 | |
| 3.4 | φ(mm) | Extra wheels (dimensions) | φ150×54 | |
| 3.5 | Wheels, number front/rear (x = driving wheels) | 1x +1/4 | ||
| 3.6 | b10 (mm) | Cancer, anterior | 522 | |
| 3.7 | b11 (mm) | Cancer, rear | 390/505 | |
| Dimensions | 4.2 | h1 (mm) | Height, mast lowered | See table below |
| 4.3 | h2{mm) | Free lifting | See table below | |
| 4.4 | h3{mm) | Lifting height | See table below | |
| 4.5 | h4{mm) | Height, mast raised | See table below | |
| 4.9 | h14{mm) | Joystick height in driving position min./max. | 850/1385 | |
| 4.15 | h13{mm) | Height, lowered | 90 | |
| 4.19 | l1{mm) | Total length | 2 100 | |
| 4.20 | I2(mm) | Length of fork to back | 950 | |
| 4.21 | b1 (mm) | Overall width | 820 | |
| 4.22 | s/e/I (mm) | Fork dimensions DIN ISO 2331 | 60/180/1150 | |
| 4.25 | b5{mm) | Fork width | 570 | |
| 4.32 | m2{mm) | Prošvaiste, wheel base centre | 23 | |
| 4.33 | Ast(mm) | Working aisle width for pallets 1000×1200 mm (taken across) | 2 536 | |
| 4.34 | Ast(mm) | Working aisle width for pallets 800×1200 (taken lengthways) | 2 523 | |
| 4.35 | Wa(mm) | Turning radius | 1 640 | |
| Operating parameters | 5.1 | km/h | Driving speed, loaded/unloaded | 5.4/6.0 |
| 5.2 | m/s | Lifting speed, loaded/unloaded | 0.13/0.20 | |
| 5.3 | m/s | Permit speed, loaded/unloaded | 0.28/0.23 | |
| 5.8 | % | Maximum hill climbing capacity, loaded/unloaded | 6/10 | |
| 5.10 | Service brake | Electromagnetic | ||
| Electrical parameters | 6.1 | kW | Running engine power S2 60min | 1.7 |
| 6.2 | kW | Lifting engine power S3 4,5% | 3.2 | |
| 6.3 | Battery, reminatis DIN 43531/35/36 A, B, C, no | 3PZS | ||
| 6.4 | V /Ah | Battery voltage / capacity C5 | 24/375 | |
| 6.5 | kg | Weight of matter, min.+/- 5% | 288 | |
| 6.6 | kWh/h | Energy consumption according to DIN EN 16796 | 1.70 | |
| Additional info. | 8.1 | Engine type | AC (driving) | |
| 8.4 | dB(A) | Sound level in the operator's ear according to EN 12053 | <70 |
Table of lifting and structural heights
| Boom type | Building height, mm | Clearance, mm | Lift, mm (stroke) | Height of boom raised, mm | Lifting height, mm |
| Double with free running | 2078 | 1410 | 2830 | 3500 | 2920 |
| Triple with free running | 1978 | 1310 | 3930 | 4600 | 4020 |
| 2128 | 1420 | 4230 | 4900 | 4320 | |
| 2228 | 1520 | 4530 | 5200 | 4620 |
