Aprašymas
PRODUCT DESCRIPTION AND BENEFITS
 |
 |
| Mechanically disengageable gear
SC Series lifts can be repositioned in the event of a power failure |
Moto Hour Meter
Automatically records the lift's moto hours. The operator can plan periodic maintenance based on these |
 |
 |
| Error code display
Simple fault identification and easy maintenance |
Emergency lowering system
In the event of a power failure, the emergency lowering system will safely lower the operator down |
 |
 |
| Scissor mechanism lock
Allows safe maintenance work - the scissor mechanism will not automatically lower itself |
Self-locking gates
Self-locking entrance gates ensure operator safety |
 |
 |
| Main power switch
When the SC Series is not in use for an extended period of time, pressing this switch will disconnect the power supply and thus avoid draining the battery. |
Charging protection system
When the battery is fully charged, the system cuts off the power, protecting the battery and charger. |
 |
 |
| Signal lamp
Signal lamp switches on during lift operation |
Emergency stop button
Both control panels have emergency stop buttons. In the event of an accident, pressing the button instantly stops the hoist's movement and ensures operator safety |
 |
 |
| Pothole protection system
When the lift goes up, the pothole protection system deploys automatically. This is particularly important when working on uneven surfaces |
Automatic braking system
Automatic braking system for safe operation when parking on slopes |
 |
 |
| Tilt protection
When the hoist exceeds the specified permissible angle of inclination, the system will warn and stop the hoist. . |
Sound and motion signal
Audible warning signal during hoist movement |
 |
 |
| Convenient maintenance
Maintenance is facilitated by easy access to electrical components on both sides of the housing |
Proportional lifting handle
Allows comfortable control of lifting and driving speed |
 |
 |
| Lift cradle extension
The extension of the cradle floor allows you to work over obstacles and increases the working area |
Portable control panel
Thanks to the portable control panel, the operator can operate the lift from the operator's side |
 |
 |
| Low lift height
SC series lifts can pass at limited working heights |
Front-wheel drive and steering
Thanks to its small turning radius, the SC Series is suitable for working in tight spaces. |
Technical parameters
| No. | Parameter | SC14EN |
| 1 | Safe Operating Weight (S.D.W.) | 320 kg |
| 2 | S.D.S. on extended platform | 113 kg |
| 3 | Maximum number of employees (internal) | 3 |
| 4 | Maximum number of employees (outdoor) | 1 |
| 5 | Maximum working height (h2) | 14m |
| 6 | Maximum platform floor height (h1) | 12m |
| 7 | Total length (l1) | 2.48m |
| 8 | Overall width (w1) | 1.15m |
| 9 | Overall height (with cradle protection raised) (h4) | 2.58m |
| 10 | Overall height (with cradle guard down) (h3) | 2.04m |
| 11 | Platform size (length/width) | 2.27×1.12m |
| 12 | The platform is lengthening | 0.9m |
| 13 | Clearance (lowered) | 0.10m |
| 14 | Promenade (Pakeltos) | 0.019m |
| 15 | Wheel base | 1.87m |
| 16 | Minimum turning circle (inner/outer) | 2.5m |
| 17 | Lifting motor, kW | 24V/3.3kw |
| 18 | Driving motor, kW | 24V/1.5 |
| 19 | Driving speed (Lowered) | 4.0km/h |
| 20 | Driving speed (Raised) | 0.8 km/h |
| 21 | Lifting/lowering time | 80/60s |
| 22 | Batteries | 4x6V/280Ah |
| 23 | Built-in charger | 24V/30Ah |
| 24 | Overcomes downhill / uphill | 25% |
| 25 | Maximum headroom (outdoor/indoor) | 1.5°/3° |
| 26 | Wheels | 381x127mm |
| 27 | Own weight | 2925kg |
