Minimum quantity should 2 of "Discover EV512RG-103 Battery (105-pack)"
€Good price
Discover EV512G-080 battery
DISCOVER GEL - deep cycle traction batteries adapted to real working conditions - i.e. can be quickly recharged with a charger of the appropriate capacity, can „tolerate” partial charges during the day, are ideal for replacing EXIDE GEL or Sonnenchein GEL batteries (e.g. GF 12 76, etc.)
Discover® DRY CELL industrial traction and deep cycle batteries are “TRUE GEL” batteries and are suitable for both replacing end-of-life batteries and for fitting to new equipment. The batteries provide exceptional durability even under partial charging and/or high ambient temperature operating conditions. DISCOVER GEL batteries have more cycles than Discover AGM batteries, making them ideal for demanding energy storage applications.
Remark:
Always make sure you use the correct charging algorithm. The DISCOVER GEL battery is suitable for all classic GEL charging algorithms that have a balancing mode such as EXIDE, Sonnenchein GEL (market standard), etc.
If you have had to undercharge the battery during the day, we recommend that you leave the battery overnight after the work to recharge it fully - in this case the damage caused by undercharging is fully compensated for (as one undercharge can destroy between 3 and 6 cycles of the battery's lifetime, which in total is about 550 cycles at a depth of discharge of 80%, or about 600 to 900 cycles at a discharge depth of 70%).
The manufacturer declares that DISCOVER GEL batteries can be partly recharged during the day if necessary (e.g. to allow enough time for the evening shift). In such cases, it is very important to be aware that partial charges can only be carried out with chargers that have the DISCOVER GEL charging algorithm installed and, very importantly, that the equipment is left on full charge overnight on the days on which the partial charges were carried out, in order to compensate for the damage caused by the partial charges.
OUTSTANDING FEATURES OF GEL CELL BATTERIES
IMPROVED LEAD ALLOYS - Thick graphite-enriched alloy plates maintain maximum lifetime
CARBON REINFORCEMENT - Carbon additives improve cycling performance, charge acceptance and protect against partial charge damage
AUTOMATIC INTER-COMPARTMENT WELDING - Improved consistency of welding between cell sections, which saves lead compared to manual welding. Withstands higher currents and at the same time has lower internal resistance
POLYPROPYLENE HOUSING - High heat resistance and reliability. High-precision pressure regulating valves reduce water loss and extend service life. Integrated spark arrestors protect against fire and explosion
MAIN FEATURES
Constant Ah capacity throughout lifetime
Long lifetime compared to other liquid electrolyte / AGM / Gel batteries
600 - 900 cycles at 70% IG (IEC 254-1 Traction Lead Acid)
450+ cycles 100% IG (DIN 43 539 VRLA)”
Can operate at cooler temperatures than AGMs
Can operate at lower temperatures than liquid electrolyte batteries
These chargers are more energy efficient. During charging, the electric current is made up of individually modulated (on demand) DC pulses of different widths (hence the name high-frequency chargers), which results in a significantly lower heating of the battery being charged, as the average current is lower than with conventional chargers, while at the same time increasing the overall energy efficiency of the charging process, reducing adverse side effects such as water electrolysis and the formation of insoluble lead layers. Therefore, we always recommend the use of these chargers in high-intensity or aggressive working conditions.
Įtampa – 12V, talpa105Ah@C20 arba 86Ah@C5, matmenys – 308 x 168 x 237 mm su gnybtais, 211 mm – jeigu su M8 varžtais, svoris – 30 kg.
Fullriver Full Force neaptarnaujami AGM akumuliatoriai sukurti patikimam cikliniam darbui ir ilgam tarnavimo laikui. Pagaminti naudojant 99,994 % gryną šviną ir storas plokštes, jie pasižymi didele talpa, greitu įkrovimu, atsparumu vibracijoms bei visiškai nereikalauja priežiūros. Sandari AGM konstrukcija apsaugo nuo elektrolito išsiliejimo ir leidžia montuoti akumuliatorių beveik bet kurioje padėtyje
Puikiai pakelia dideles apkrovas – gamintojas netgi specifikuoja starterinę srovę 680A, kas yra labai daug kaip gilaus ciklo akumuliatoriui
185,00 €Original price was: 185,00 €.160,00 €Current price is: 160,00 €. (including VAT: 193,60 €)Add to cart
These chargers are more energy efficient. During charging, the electric current is made up of individually modulated (on demand) DC pulses of different widths (hence the name high-frequency chargers), which results in a significantly lower heating of the battery being charged, as the average current is lower than with conventional chargers, while at the same time increasing the overall energy efficiency of the charging process, reducing adverse side effects such as water electrolysis and the formation of insoluble lead layers. Therefore, we always recommend the use of these chargers in high-intensity or aggressive working conditions.
Discover® CELLS industrial traction and deep cycle batteries meet the “REAL GEL” traction formulation and meet the requirements of both replacement and Original Equipment Manufacturers. With a long history of safety and reliability, these batteries provide exceptional longevity even in partial charge and high temperature conditions. Gel cell batteries outperform liquid electrolyte and AGM batteries in recovery from deep discharges, making them ideal for demanding energy storage applications.
DISCOVER DRY CELL AGMs are deep cycle traction batteries adapted to real working conditions - i.e. they can be quickly recharged with a charger of the appropriate capacity, can „tolerate” partial recharges during the course of the day, can withstand high instantaneous loads, have a higher energy density than GEL batteries, withstand well outdoor conditions, can be permanently left connected to the charger, etc. Ideal for installation in new machinery and for replacing batteries that have already been used up. Simply select the right charger algorithm and the Discover EV512A-70 will work long and reliably.
Remark:
Always make sure you use the correct charging algorithm. DISCOVER AGM battery is suitable for all classic AGM charging algorithms that have a balancing mode (recommended), and is also suitable for charging with constant current and constant voltage (up to 2.45V/cycle) chargers, but strictly not for starter AGM battery chargers. I.e. EXIDE, Sonnenchein GEL or DISCOVER GEL charging algorithms are suitable for them as they all have a balancing mode.
If you have had to undercharge the battery during the day, we recommend that you leave the battery overnight after the work to recharge it fully - this will fully compensate for the damage caused by undercharging (as a single undercharge can destroy between 3 and 6 cycles of the battery's lifetime, which is about 450 cycles at a discharge depth of 80%, or about 500 to 700 at a discharge depth of 70%).
All the information you need on how to use AGM batteries correctly, click here:
DISCOVER DRY CELL AGMs are deep cycle traction batteries adapted to real working conditions - i.e. they can be quickly recharged with a charger of the appropriate capacity, can „tolerate” partial recharges during the course of the day, can withstand high instantaneous loads, have a higher energy density than GEL batteries, withstand well outdoor conditions, can be permanently left connected to the charger, etc. Ideal for both installation in new equipment and replacement, e.g. TROJAN T145. Just select the right charger algorithm and Discover EVGT6A-A will work long and reliably.
Remark:
Always make sure you use the correct charging algorithm. DISCOVER AGM battery is suitable for all classic AGM charging algorithms that have a balancing mode (recommended), and is also suitable for charging with constant current and constant voltage (up to 2.45V/cycle) chargers, but strictly not for starter AGM battery chargers. I.e. EXIDE, Sonnenchein GEL or DISCOVER GEL charging algorithms are suitable for them as they all have a balancing mode.
If you have had to undercharge the battery during the day, we recommend that you leave the battery overnight after the work to recharge it fully - in this case the damage caused by undercharging is fully compensated for (as one undercharge can destroy between 3 and 6 battery life cycles, which together add up to about 450 cycles at a depth of discharge of 80%, or about 500 to 700 at a discharge depth of 70%).
